manualshive.com logo in svg

Mazda 2007 Zoom-Zoom, Owner'S Manual

The Mazda 2007 Zoom-Zoom Owner's Manual is available for free download from manualshive.com. This comprehensive manual provides all the essential information you need to fully understand and operate your Mazda 2007 Zoom-Zoom. Get your manual now and unlock the full potential of your vehicle.

Share
Download
background image

Black plate (165,1)

q

Transaxle Ranges

The shift lever must be in P or N to
operate the starter.

P (Park)

P locks the transaxle and prevents the
front wheels from rotating.

WARNING

Always set the shift lever to P and set
the parking brake:

Only setting the shift lever to the P
position without using the parking
brake to hold the vehicle is
dangerous. If P fails to hold, the
vehicle could move and cause an
accident.

CAUTION

Ø

Shifting into P, N or R while the
vehicle is moving can damage
your transaxle.

Ø

Shifting into a driving gear or
reverse when the engine is running
faster than idle can damage the
transaxle.

R (Reverse)

In position R, the vehicle moves only
backward. You must be at a complete stop
before shifting to or from R, except under
rare circumstances as explained in
Rocking the Vehicle (page 4-8).

N (Neutral)

In N, the wheels and transaxle are not
locked. The vehicle will roll freely even
on the slightest incline unless the parking
brake or brakes are on.

WARNING

If the engine is running faster than idle,
do not shift from N or P into a driving
gear:

It's dangerous to shift from N or P
into a driving gear when the engine
is running faster than idle. If this is
done, the vehicle could move
suddenly, causing an accident or
serious injury.

Do not shift into N when driving the
vehicle:

Shifting into N while driving is
dangerous. Engine braking cannot be
applied when decelerating which
could lead to an accident or serious
injury.

CAUTION

Do not shift into N when driving the
vehicle. Doing so can cause transaxle
damage.

NOTE

Apply the parking brake or depress the brake
pedal before moving the shift lever from N to
prevent the vehicle from moving unexpectedly.

D (Drive)

D is the normal driving position. From a
stop, the transaxle will automatically shift
through a 6-gear sequence.

M (Manual)

M is the manual shift mode position.
Gears can be shifted up or down by
operating the shift lever.
Refer to Manual Shift Mode (page 5-12).

Driving Your Mazda

Starting and Driving

5-11

CX-7_8X59-EA-07E_Edition3 Page165
Wednesday, July 25 2007 3:18 PM

Form No.8X59-EA-07E

Summary of Contents for 2007 Zoom-Zoom



























































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2007 Zoom-Zoom

Eaton Green Motion Building Quick Start Manual preview
Green Motion Building
Brand: Eaton Pages: 12
Westin 23-3130 Instructions preview
23-3130
Brand: Westin Pages: 3
Saleen 10-8002-C11998B Installation Manual preview
10-8002-C11998B
Brand: Saleen Pages: 12
Buick 2013 Buick Verano Manual preview
2013 Buick Verano
Brand: Buick Pages: 5
Doug Thorley Headers THY-464-1 Instructions preview
THY-464-1
Brand: Doug Thorley Headers Pages: 5
Edelbrock 66002 Installation Instructions preview
66002
Brand: Edelbrock Pages: 2
Safe Fleet RVS-082550 Instruction Manual preview
RVS-082550
Brand: Safe Fleet Pages: 11
Camec 042374 User Manual preview
042374
Brand: Camec Pages: 19
Rago FABRICATION R2223TTUNDM Installation Manual preview
R2223TTUNDM
Brand: Rago FABRICATION Pages: 10
Webasto Telestart T91 Installation Instructions Manual preview
Telestart T91
Brand: Webasto Pages: 18
Volvo 2006 XC70 Owner'S Manual preview
2006 XC70
Brand: Volvo Pages: 211
Audiovox AA-BAT Programming Manual preview
AA-BAT
Brand: Audiovox Pages: 3
Victory 4x4 VRKCAP Install Instructions Manual preview
VRKCAP
Brand: Victory 4x4 Pages: 9
Curt Manufacturing 58963 Installation Manual preview
58963
Brand: Curt Manufacturing Pages: 4
Whispbar K559W Fitting Instructions Manual preview
K559W
Brand: Whispbar Pages: 112
RAM RAM C 2013 Specification preview
RAM C 2013
Brand: RAM Pages: 5
RAM Cargo Van 2014 Owner'S Manual preview
Cargo Van 2014
Brand: RAM Pages: 666
Waeco PerfectView LCD350 Installation And Operating Manual preview
PerfectView LCD350
Brand: Waeco Pages: 36

Brands by name

Popular brands

Load more brands