Mazda 2007 Zoom-Zoom Owner'S Manual Download Page 133

Page: 133 / 410

Black plate (133,1)

2. Depress the mirror switch in the

appropriate direction.

Outside mirror

Mirror switch

Selector switch

After adjusting the mirror, lock the control
by placing the selector switch in the
middle position.

Folding the mirror

Fold the outside mirror rearward until it is
flush with the vehicle.

WARNING

Always return the outside mirrors to
the driving position before you start
driving:

Driving with the outside mirrors
folded in is dangerous. Your rear view
will be restricted, and you could have
an accident.

Mirror defroster

To turn on the mirror defrosters, turn the
ignition switch to the ON position and
push the rear window defroster switch
(page 5-59).

Rearview Mirror

Rearview mirror adjustment

Before driving, adjust the rearview mirror
to center on the scene through the rear
window.

Reducing glare from headlights

Adjust the mirror with the day/night lever
in the day position.

Push the lever forward for day driving.
Pull it back to reduce glare from
headlights.

Night

Day

Day/Night lever

Knowing Your Mazda

Steering Wheel and Mirrors

3-55

Some models.

CX-7_8X59-EA-07E_Edition3 Page133
Wednesday, July 25 2007 3:17 PM

Form No.8X59-EA-07E

Summary of Contents for 2007 Zoom-Zoom



























































































































































































































































































































































































































Search results

Summary of Contents for 2007 Zoom-Zoom

Reviews:

Related manuals for 2007 Zoom-Zoom

Brands by name

Popular brands

Mazda 2007 Zoom-Zoom, Owner'S Manual

Search results

Summary of Contents for 2007 Zoom-Zoom

Reviews:

Related manuals for 2007 Zoom-Zoom

Brands by name

Popular brands