Mazda 2007 Zoom-Zoom Owner'S Manual Download Page 139

Page: 139 / 410

Black plate (139,1)

Before Getting In

Be sure the windows, outside mirrors,
and outside lights are clean.

Inspect inflation pressures and
condition of tires.

Look under the vehicle for any sign of
fluid leaks.

If you plan to back up, make sure
nothing is in your way.

NOTE

Engine oil, engine coolant, brake fluid, washer
fluid, and other fluid levels should be
inspected. See Maintenance, Section 8.

After Getting In

Are all doors closed and locked?

Is the seat adjusted properly?

Are the inside and outside mirrors
adjusted?

Is everyone's seat belt fastened?

Check all gauges.

Check all warning lights when the
ignition switch is turned to the ON
position.

Release the parking brake and make
sure the brake warning light goes off.

Always be thoroughly familiar with your
Mazda.

Before Driving Your Mazda

Before Starting the Engine

4-5

CX-7_8X59-EA-07E_Edition3 Page139
Wednesday, July 25 2007 3:17 PM

Form No.8X59-EA-07E

Summary of Contents for 2007 Zoom-Zoom



























































































































































































































































































































































































































Search results

Summary of Contents for 2007 Zoom-Zoom

Reviews:

Mazda 2007 Zoom-Zoom, Owner'S Manual, Page: 139 / 410

Search results

Summary of Contents for 2007 Zoom-Zoom

Reviews: