Mazda 2007 Zoom-Zoom Owner'S Manual Download Page 128 | Manualshive

Page: 128 / 410

background image

Black plate (128,1)

If the engine doesn't start with the correct
ignition key, and the security indicator
light keeps illuminating or flashing, the
system may have a malfunction. Consult
an Authorized Mazda Dealer.

NOTE

l

If the security indicator light comes on and
stays on when the ignition switch is turned
to the ON position, the engine will not start.

l

Signals from a TV or radio station, or from
a transceiver or a mobile telephone, could
interfere with your immobilizer system. If
you are using the proper key and your
engine fails to start, check the security
indicator light. If it is flashing, remove the
ignition key and wait 2 seconds or more,
then reinsert it and try starting the engine
again. If it doesn't start after 3 or more
tries, contact an Authorized Mazda Dealer.

l

If the security indicator light flashes
continuously while you are driving, don't
shut off the engine. Go to an Authorized
Mazda Dealer and have it checked. If you
shut off the engine while the light is
flashing you won't be able to restart it.

l

Since the electronic codes are reset when
repairing the immobilizer system, the keys
are needed. Bring all the existing keys to an
Authorized Mazda Dealer.

q

Maintenance

If you have a problem with the
immobilizer system or the key, consult an
Authorized Mazda Dealer.

NOTE

l

The keys carry a unique electronic code.
For this reason, and to assure your safety,
obtaining replacement key requires some
waiting time. They are only available
through an Authorized Mazda Dealer.

l

Always keep a spare key, in case one is lost.
If a key is lost, contact an Authorized
Mazda Dealer as soon as possible.

l

If you lose a key, an Authorized Mazda
Dealer will reset the electronic codes of
your remaining keys and immobilizer
system. Bring all the remaining keys to an
Authorized Mazda Dealer to reset.
Starting the vehicle with a key that has not
been reset is not possible.

q

Modification and Add-On
Equipment

Mazda cannot guarantee the immobilizer
system's operation if the system has been
modified or if any add-on equipment has
been installed to it.

CAUTION

To avoid damage to your vehicle, do
not modify the system or install any
add-on equipment to the immobilizer
system or the vehicle.

3-50

Knowing Your Mazda

Security System

CX-7_8X59-EA-07E_Edition3 Page128
Wednesday, July 25 2007 3:17 PM

Form No.8X59-EA-07E

«
...
126
127
128
129
130
...
»

Summary of Contents for 2007 Zoom-Zoom



























































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2007 Zoom-Zoom

Brand: Jeda Pages: 8

Brand: Jeep Pages: 496

Brand: OEM Tools Pages: 4

QuadraTop Adventure Top S

Brand: Quadratec Pages: 20

Brand: Triumph Pages: 86

Brand: AMP Research Pages: 12

Half Size Trunk Box Organizer C-TBO-CV

Brand: Havis-Shields Pages: 1

Brand: Volvo Pages: 8

Brand: EEZ RV Pages: 31

Brand: Safe Fleet Pages: 11

Brand: Camec Pages: 19

Brand: B-Speech Pages: 4

autoSteady AS101

Brand: Enduro Pages: 48

Brand: Würth Pages: 36

Brand: Voxoa Pages: 48

Electra 225 1965

Brand: Buick Pages: 914

V70XC Cross country 1998

Brand: Volvo Pages: 262

OCTAVIA - TECHNICAL CHANGES 11-2009

Brand: Skoda Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands