manualshive.com logo in svg

Mazda 2006 Tribute, Owner'S Manual, Page: 53 / 282

Share
Download
Mazda 2006 Tribute Owner'S Manual Download Page 53

JOBNAME: No Job Name PAGE: 53 SESS: 1 OUTPUT: Wed Jun 15 16:24:35 2005
/ford_pdm/ford/own2002/j14/mpdiff

Increasing speed while using cruise control/speed control

There are two ways to set a higher
speed:

•

Press and hold the SET ACC
control until you get to the
desired speed, then release the
control. You can also use the SET
ACCEL control to operate the
Tap-Up function. Press and
release this control to increase
the vehicle set speed in small
amounts by 1 mph (1.6 km/h).

•

Use the accelerator pedal to get to the desired speed. When the
vehicle reaches that speed press and release the SET ACC control.

Reducing speed while using cruise control/speed control

There are two ways to reduce a set
speed:

•

Press and hold the CST control
until you get to the desired
speed, then release the control.
You can also use the CST control
to operate the Tap-Down
function. Press and release this
control to decrease the vehicle
set speed in small amounts by 1
mph (1.6 km/h).

•

Depress the brake pedal until the
desired vehicle speed is reached,
press the SET ACC control.

RSM

CST

SET

ACC

RSM

CST

SET

ACC

RSM

CST

SET

ACC

art=ctocf511_b

art=ctocf514_b

art=ctocf511_b

DIFF-MARKED Review Copy ——
(OLD=2006 Tribute fus Owners Guide (post-2002-fmt) 06.5 Tribute Champ (#26074) (May-02-2005 14:29:19))
(NEW=2006 Tribute fus Owners Guide (post-2002-fmt) 2006.5 Tribute CNE Review (#26074) (Jun-15-2005
16:18:13))
2006 Tribute (j14), Owners Guide (post-2002-fmt) (own2002), Market: USA (fus)

PAGE: 53 OP: root EDIT SESSION: 1 DATE: JUNE 15 2005 at 16:24 JOB: @ibm2/ford_pdm/CLS_ford/GRP_own2002/JOB_j14/DIV_mpdiff

Driver Controls

53

Summary of Contents for 2006 Tribute



























































































































































































































































































Reviews:

No comments