Home
/
Mazda
/
2006 Tribute
/
Owner'S Manual

Mazda 2006 Tribute, Owner'S Manual, Page: 194 / 282

Share

Page: 194 / 282

Mazda 2006 Tribute Owner'S Manual Download Page 194

JOBNAME: No Job Name PAGE: 194 SESS: 1 OUTPUT: Wed Jun 15 16:24:35 2005
/ford_pdm/ford/own2002/j14/mpdiff

WARNING: Changing a tire is dangerous if not done properly.
The vehicle can slip off the jack and seriously injure you or
someone. Be sure to follow the directions for changing a tire,
and never get under a vehicle that is supported only by a jack.

WARNING: If the vehicle slips off the jack, you or someone
else could be seriously injured.

1. Park on a level surface, activate

hazard flashers and place
gearshift lever in P (Park)
(automatic transmission) or R
(Reverse) (manual
transmission).

2. Set the parking brake and turn

engine off.

3. Block the diagonally opposite

wheel.

Removing the jack and tools

Non-cargo management system
(if equipped):

The jack and tools

are located under the carpeted
hardboard.

Pull back the carpet away from the lift gate, and remove the hardboard
cover.

art=204gf012_a

art=naver301_b

art=204er508_c

DIFF-MARKED Review Copy ——
(OLD=2006 Tribute fus Owners Guide (post-2002-fmt) 06.5 Tribute Champ (#26074) (May-02-2005 14:29:19))
(NEW=2006 Tribute fus Owners Guide (post-2002-fmt) 2006.5 Tribute CNE Review (#26074) (Jun-15-2005
16:18:13))
2006 Tribute (j14), Owners Guide (post-2002-fmt) (own2002), Market: USA (fus)

PAGE: 194 OP: root EDIT SESSION: 1 DATE: JUNE 15 2005 at 16:24 JOB: @ibm2/ford_pdm/CLS_ford/GRP_own2002/JOB_j14/DIV_mpdiff

Roadside Emergencies

194

«
...
192
193
194
195
196
...
»

Summary of Contents for 2006 Tribute



























































































































































































































































































Reviews:

No comments