Home
/
Mazda
/
2006 Tribute
/
Owner'S Manual

Mazda 2006 Tribute, Owner'S Manual, Page: 196 / 282

Share

Page: 196 / 282

Mazda 2006 Tribute Owner'S Manual Download Page 196

JOBNAME: No Job Name PAGE: 196 SESS: 1 OUTPUT: Wed Jun 15 16:24:35 2005
/ford_pdm/ford/own2002/j14/mpdiff

To remove jack from vehicle:

1. Release the thumbscrew on the

bracket.

2. Release the retention clip on

the upper part of the jack
bracket.

3. Dislodge the jack from the

bracket and carefully guide jack
down and out through trim
opening, upper end out first.

Remove the lug wrench from the
jack in order to remove the spare
tire from under the vehicle.

Removing the spare tire or spare tire and tether (if equipped)

1. Insert the lug wrench through

the access hole in the rear
bumper.

2. Turn the handle

counterclockwise and lower the
spare tire until it can be slid
rearward and the cable is slack.

3. Slide the retainer through the

center of the wheel.

art=204er510_a

art=204er104_a

art=204er107_a

DIFF-MARKED Review Copy ——
(OLD=2006 Tribute fus Owners Guide (post-2002-fmt) 06.5 Tribute Champ (#26074) (May-02-2005 14:29:19))
(NEW=2006 Tribute fus Owners Guide (post-2002-fmt) 2006.5 Tribute CNE Review (#26074) (Jun-15-2005
16:18:13))
2006 Tribute (j14), Owners Guide (post-2002-fmt) (own2002), Market: USA (fus)

PAGE: 196 OP: root EDIT SESSION: 1 DATE: JUNE 15 2005 at 16:24 JOB: @ibm2/ford_pdm/CLS_ford/GRP_own2002/JOB_j14/DIV_mpdiff

Roadside Emergencies

196

«
...
194
195
196
197
198
...
»

Summary of Contents for 2006 Tribute



























































































































































































































































































Reviews:

No comments