Home
/
Mazda
/
2006 Tribute
/
Owner'S Manual

Mazda 2006 Tribute, Owner'S Manual, Page: 123 / 282

Share

Page: 123 / 282

Mazda 2006 Tribute Owner'S Manual Download Page 123

JOBNAME: No Job Name PAGE: 123 SESS: 1 OUTPUT: Wed Jun 15 16:24:35 2005
/ford_pdm/ford/own2002/j14/mpdiff

seat from side to side. Also try to tug the seat forward. Check to see if
the anchors hold the seat in place.

WARNING: If the safety seat is not anchored properly, the risk
of a child being injured in a crash greatly increases.

DIFF-MARKED Review Copy ——
(OLD=2006 Tribute fus Owners Guide (post-2002-fmt) 06.5 Tribute Champ (#26074) (May-02-2005 14:29:19))
(NEW=2006 Tribute fus Owners Guide (post-2002-fmt) 2006.5 Tribute CNE Review (#26074) (Jun-15-2005
16:18:13))
2006 Tribute (j14), Owners Guide (post-2002-fmt) (own2002), Market: USA (fus)

PAGE: 123 OP: root EDIT SESSION: 1 DATE: JUNE 15 2005 at 16:24 JOB: @ibm2/ford_pdm/CLS_ford/GRP_own2002/JOB_j14/DIV_mpdiff

Seating and Safety Restraints

123

«
...
121
122
123
124
125
...
»

Summary of Contents for 2006 Tribute



























































































































































































































































































Reviews:

No comments