Home
/
Mazda
/
2006 Tribute
/
Owner'S Manual

Mazda 2006 Tribute, Owner'S Manual, Page: 102 / 282

Share

Page: 102 / 282

Mazda 2006 Tribute Owner'S Manual Download Page 102

JOBNAME: No Job Name PAGE: 102 SESS: 1 OUTPUT: Wed Jun 15 16:24:35 2005
/ford_pdm/ford/own2002/j14/mpdiff

passenger seat, the passenger airbag will be disabled. Even though the
passenger airbag is disabled, the

9

pass airbag off

9

lamp may or may not

be illuminated according to the table below.

Objects

Pass Airbag Off
Indicator Lamp

Passenger Airbag

Small (i.e. 3 ring
binder, small purse,
bottled water)

Unlit

Disabled

Medium (i.e. heavy
briefcase, fully packed
luggage)

Lit

Disabled

Empty seat, Small or
medium object with
safety belt buckled

Lit

Disabled

If you think that the status of the passenger airbag off indicator lamp is
incorrect, check for the following:

•

Objects lodged underneath the seat

•

Objects between the seat cushion and the center console (if
equipped)

•

Objects hanging off the seat back

•

Objects stowed in the seatback map pocket (if equipped)

•

Objects placed on the occupant’s lap

•

Cargo interference with the seat

•

Other passengers pushing or pulling on the seat

•

Rear passenger feet and knees resting or pushing on the seat

The conditions listed above may cause the weight of a properly seated
occupant to be incorrectly interpreted by the front passenger sensing
system. The person in the front passenger seat may appear heavier or
lighter due to the conditions described in the list above.

DIFF-MARKED Review Copy ——
(OLD=2006 Tribute fus Owners Guide (post-2002-fmt) 06.5 Tribute Champ (#26074) (May-02-2005 14:29:19))
(NEW=2006 Tribute fus Owners Guide (post-2002-fmt) 2006.5 Tribute CNE Review (#26074) (Jun-15-2005
16:18:13))
2006 Tribute (j14), Owners Guide (post-2002-fmt) (own2002), Market: USA (fus)

PAGE: 102 OP: root EDIT SESSION: 1 DATE: JUNE 15 2005 at 16:24 JOB: @ibm2/ford_pdm/CLS_ford/GRP_own2002/JOB_j14/DIV_mpdiff

Seating and Safety Restraints

102

«
...
100
101
102
103
104
...
»

Summary of Contents for 2006 Tribute



























































































































































































































































































Reviews:

No comments