Home
/
Mazda
/
2006 Tribute
/
Owner'S Manual

Mazda 2006 Tribute, Owner'S Manual, Page: 150 / 282

Share

Page: 150 / 282

Mazda 2006 Tribute Owner'S Manual Download Page 150

JOBNAME: No Job Name PAGE: 150 SESS: 1 OUTPUT: Wed Jun 15 16:24:35 2005
/ford_pdm/ford/own2002/j14/mpdiff

GAWR (Gross Axle Weight Rating)

– is the maximum allowable

weight that can be carried by a single axle (front or rear).

These

numbers are shown on the Safety Compliance Certification Label
located on the B-Pillar or the edge of the driver’s door. The total
load on each axle must never exceed its GAWR.

WARNING: Exceeding the Safety Compliance Certification
Label axle weight rating limits could result in substandard
vehicle handling or performance, engine, transmission and/or
structural damage, serious damage to the vehicle, loss of
control and personal injury.

Note:

For trailer towing information refer to

Trailer towing

found in

this chapter or the

RV and Trailer Towing Guide

provided by your

authorized dealer.

GVW (Gross Vehicle Weight)

– is the Vehicle Curb cargo +

passengers.

art=f23gf113_b

DIFF-MARKED Review Copy ——
(OLD=2006 Tribute fus Owners Guide (post-2002-fmt) 06.5 Tribute Champ (#26074) (May-02-2005 14:29:19))
(NEW=2006 Tribute fus Owners Guide (post-2002-fmt) 2006.5 Tribute CNE Review (#26074) (Jun-15-2005
16:18:13))
2006 Tribute (j14), Owners Guide (post-2002-fmt) (own2002), Market: USA (fus)

PAGE: 150 OP: root EDIT SESSION: 1 DATE: JUNE 15 2005 at 16:24 JOB: @ibm2/ford_pdm/CLS_ford/GRP_own2002/JOB_j14/DIV_mpdiff

Tires, Wheels and Loading

150

«
...
148
149
150
151
152
...
»

Summary of Contents for 2006 Tribute



























































































































































































































































































Reviews:

No comments