Home
/
Mazda
/
2006 Tribute
/
Owner'S Manual

Mazda 2006 Tribute, Owner'S Manual, Page: 266 / 282

Share

Page: 266 / 282

Mazda 2006 Tribute Owner'S Manual Download Page 266

JOBNAME: No Job Name PAGE: 266 SESS: 1 OUTPUT: Wed Jun 15 16:24:35 2005
/ford_pdm/ford/own2002/j14/mpdiff

High fluid level

Fluid levels above the
crosshatch zone may result in
transaxle failure. An overfill
condition of transmission fluid
may cause shift and/or
engagement concerns and/or
possible damage.

High fluid levels can be caused by an overheating condition.

Adjusting automatic transmission fluid levels

Before adding any fluid, make sure the correct type is used. The type of
fluid used is normally indicated on the dipstick and also in the

Refill

Capacities

section in this chapter.

Use of a non-approved automatic transmission fluid may cause
internal transaxle component damage.

If necessary, add fluid in 1/2 pint (250 mL) increments through the filler
tube until the level is correct.

If an overfill occurs, excess fluid
should be removed by an authorized
dealer.

An overfill condition of
transmission fluid may cause
shift and/or engagement
concerns and/or possible
damage.

Do not use supplemental transmission fluid additives, treatments or
cleaning agents. The use of these materials may affect transmission
operation and result in damage to internal transmission components.

art=204mc020_a

art=204mc037_a

DIFF-MARKED Review Copy ——
(OLD=2006 Tribute fus Owners Guide (post-2002-fmt) 06.5 Tribute Champ (#26074) (May-02-2005 14:29:19))
(NEW=2006 Tribute fus Owners Guide (post-2002-fmt) 2006.5 Tribute CNE Review (#26074) (Jun-15-2005
16:18:13))
2006 Tribute (j14), Owners Guide (post-2002-fmt) (own2002), Market: USA (fus)

PAGE: 266 OP: root EDIT SESSION: 1 DATE: JUNE 15 2005 at 16:24 JOB: @ibm2/ford_pdm/CLS_ford/GRP_own2002/JOB_j14/DIV_mpdiff

Maintenance and Specifications

266

«
...
264
265
266
267
268
...
»

Summary of Contents for 2006 Tribute



























































































































































































































































































Reviews:

No comments