Home
/
Mazda
/
2006 Tribute
/
Owner'S Manual

Mazda 2006 Tribute, Owner'S Manual, Page: 242 / 282

Share

Page: 242 / 282

Mazda 2006 Tribute Owner'S Manual Download Page 242

JOBNAME: No Job Name PAGE: 242 SESS: 1 OUTPUT: Wed Jun 15 16:24:35 2005
/ford_pdm/ford/own2002/j14/mpdiff

•

2.3L I4 engine

•

3.0L DOHC V6 Duratec engine

6. Wipe the indicator clean. Insert the indicator fully, then remove it

again.

•

If the oil level is within the MIN and MAX marks or the lower and
upper holes, the oil level is acceptable.

DO NOT ADD OIL.

•

If the oil level is below the MIN mark or the lower hole, engine

oil

must be added

to raise the level within the normal operating range.

art=204mc042_a

art=204mc038_b

DIFF-MARKED Review Copy ——
(OLD=2006 Tribute fus Owners Guide (post-2002-fmt) 06.5 Tribute Champ (#26074) (May-02-2005 14:29:19))
(NEW=2006 Tribute fus Owners Guide (post-2002-fmt) 2006.5 Tribute CNE Review (#26074) (Jun-15-2005
16:18:13))
2006 Tribute (j14), Owners Guide (post-2002-fmt) (own2002), Market: USA (fus)

PAGE: 242 OP: root EDIT SESSION: 1 DATE: JUNE 15 2005 at 16:24 JOB: @ibm2/ford_pdm/CLS_ford/GRP_own2002/JOB_j14/DIV_mpdiff

Maintenance and Specifications

242

«
...
240
241
242
243
244
...
»

Summary of Contents for 2006 Tribute



























































































































































































































































































Reviews:

No comments