Home
/
Mazda
/
2006 Tribute
/
Owner'S Manual

Mazda 2006 Tribute, Owner'S Manual, Page: 105 / 282

Share

Page: 105 / 282

Mazda 2006 Tribute Owner'S Manual Download Page 105

JOBNAME: No Job Name PAGE: 105 SESS: 1 OUTPUT: Wed Jun 15 16:24:35 2005
/ford_pdm/ford/own2002/j14/mpdiff

Seat-mounted side airbag system (if equipped)

WARNING: Do not place objects or mount equipment on or
near the airbag cover on the side of the seatbacks of the front
seats or in front seat areas that may come into contact with a
deploying airbag. Failure to follow these instructions may
increase the risk of personal injury in the event of a collision.

WARNING: Do not use accessory seat covers. The use of
accessory seat covers may prevent the deployment of the side
airbags and increase the risk of injury in an accident.

WARNING: Do not lean your head on the door. The side airbag
could injure you as it deploys from the side of the seatback.

WARNING: Do not attempt to service, repair, or modify the
airbag SRS, its fuses or the seat cover on a seat containing an
airbag. See an authorized dealer.

WARNING: All occupants of the vehicle should always wear
their safety belts even when an airbag SRS is provided.

CIMS #440908

com_side_title.ie

itdseq=133

CIMS #960721

com_airbag-warn.fly

itdseq=134

DIFF-MARKED Review Copy ——
(OLD=2006 Tribute fus Owners Guide (post-2002-fmt) 06.5 Tribute Champ (#26074) (May-02-2005 14:29:19))
(NEW=2006 Tribute fus Owners Guide (post-2002-fmt) 2006.5 Tribute CNE Review (#26074) (Jun-15-2005
16:18:13))
2006 Tribute (j14), Owners Guide (post-2002-fmt) (own2002), Market: USA (fus)

PAGE: 105 OP: root EDIT SESSION: 1 DATE: JUNE 15 2005 at 16:24 JOB: @ibm2/ford_pdm/CLS_ford/GRP_own2002/JOB_j14/DIV_mpdiff

Seating and Safety Restraints

105

«
...
103
104
105
106
107
...
»

Summary of Contents for 2006 Tribute



























































































































































































































































































Reviews:

No comments