Mazda 2 2016 Owner'S Manual Download

Page: 709 / 720

9–17

Speci

cations

Personalisation Features

Item

Feature

Factory

Setting

Available

Settings

Change

Method

Active Driving Display

(page 4-33 )

Display

Setting can be changed so that the Active

Driving Display is not displayed.

On/Off

C —

The display height (up/down position) can be

changed.

13 steps up/

down from

initial setting

(total: 27

steps)

C —

The method for adjusting the display

brightness (automatically/manually) can be

changed.

AUTO

AUTO/

MANUAL

C —

The standard brightness while automatic

adjustment is selected can be changed using

the brightness adjustment.

2 steps up/

down from

initial setting

(total: 5

steps)

C —

The standard brightness while manual

adjustment is selected can be changed using

the brightness adjustment.

20 steps up/

down from

initial setting

(total: 41

steps)

C —

Navigation guidance The display information can be changed.

Adaptive

Lane/Street/

Turn

Adaptive

Lane/Street/

Turn

Lane

Guidance &

Turn by Turn

Street Name

& Turn by

Turn

OFF

C —

*1 Though these systems can be turned Off, doing so will defeat the purpose of the system and Mazda recommends

that these systems remain On.

*2 For vehicles with an audio system other than the on-screen function type, the warning sound cannot be changed.

The warning sound is only a beep.

*3 Only the volume of the warning beep during Blind Spot Monitoring (BSM) operation can be changed. The

volume of the warning beep during Rear Cross Traf

c Alert (RCTA) operation cannot be changed.

*4 This system functions only when the navigation system is functioning.
*5 If the auto-wiper control is set to Off, the wiper lever

position is set to intermittent operation.

*6 The operation may stop in 15 minutes due to the effect of the outside temperature even if the operation time of

the rear window defogger has been changed to Continuous.

*7 Available only in display from the centre display.

CX-3_8FU7-EE-16J_Edition2.indb 17

2016/11/24 15:40:41

Summary of Contents for 2 2016

















































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2 2016

Reviews:

Related manuals for 2 2016

Brands by name

Popular brands

Mazda 2 2016, Owner'S Manual

Search results

Summary of Contents for 2 2016

Reviews:

Related manuals for 2 2016

Brands by name

Popular brands