manualshive.com logo in svg

Mazda 2 2016, Owner'S Manual, Page: 528 / 720

Share
Download
Mazda 2 2016 Owner'S Manual Download Page 528

6–2

Maintenance and Care

Essential Information

                Introduction

    Be careful not to hurt yourself when inspecting your vehicle, replacing a tyre, or doing some 
kind of maintenance such as car washing.
  In particular, wear thick work gloves such as cotton gloves when touching areas that 
are dif

fi

 cult to see while inspecting or working on your vehicle. Doing inspections or 

procedures with your bare hands could cause injury.
  
  If you are unsure about any procedure it describes, we strongly urge you to have a reliable 
and quali

fi

 ed technician perform the work, we recommend an Authorised Mazda Repairer.

  
  Authorised Mazda technicians and genuine Mazda parts are dedicated to your vehicle. 
Without this expertise and the parts that have been designed and made especially for your 
Mazda, inadequate, incomplete, and insuf

fi

 cient servicing may result in problems. This 

could lead to vehicle damage or an accident and injuries.
  
  For expert advice and quality service, consult an expert repairer, we recommend an 
Authorised Mazda Repairer.
  
  The owner should retain evidence that proper maintenance has been performed as 
prescribed.
  
  A claim against a warranty will not qualify if it results from lack of maintenance and not 
from defective material or authorised workmanship.
  
  The malfunction diagnosis connector is designed exclusively for connecting the specially 
designed device to perform on-board diagnosis.
  Do not connect any devices other than the specially designed malfunction diagnosis devices 
for servicing. If any device other than the malfunction diagnosis device is connected, it may 
affect the vehicle's electrical devices or lead to damage such as battery depletion.

 

Malf

u

nction 

diagnosis 
connector

 

CX-3_8FU7-EE-16J_Edition2.indb   2

CX-3_8FU7-EE-16J_Edition2.indb   2

2016/11/24   15:39:18

2016/11/24   15:39:18

Summary of Contents for 2 2016

















































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments