manualshive.com logo in svg

Mazda 2 2016, Owner'S Manual, Page: 616 / 720

Share
Download
Mazda 2 2016 Owner'S Manual Download Page 616

7–22

If Trouble Arises

Flat Tyre

*Some models.

 Emergency  Flat  Tyre 
Repair Kit 

*

 

    The  emergency 

fl

 at tyre repair kit included 

with your Mazda is for a temporary repair 
of a slightly damaged 

fl

 at tyre resulting 

from running over nails or similar sharp 
objects on the road surface.
  Perform  the  emergency 

fl

 at tyre repair 

without removing the nail or similar sharp 
object which punctured the tyre.

 NOTE

 Your vehicle is not equipped with a 
spare tyre. In the event of a 

fl

 at tyre, 

use the emergency 

fl

 at tyre repair kit 

to repair the tyre temporarily. When 
doing the repair, refer to the instructions 
included in the emergency 

fl

 at tyre 

repair kit. If an emergency repair was 
performed on a 

fl

 at tyre using the 

emergency 

fl

 at tyre repair kit, have 

an expert repairer, we recommend an 
Authorised Mazda Repairer, repair or 
replace the tyre as soon as possible. 

          About the Emergency Flat Tyre 

Repair Kit

    The  emergency 

fl

 at tyre repair kit includes 

the following items.
  

 

Tyre sealant

Injection hose

Compressor

Valve core tool

Spare valve core

Speed restriction sticker

Instr

u

ctions

 

 WARNING

 Do not allow children to touch the tyre 
sealant: 

 



  Ingestion of tyre sealant is 

dangerous. In the event tyre sealant 
is accidentally swallowed, drink 
large amounts of water immediately 
and seek medical assistance. 



  Tyre sealant that comes into contact 

with the eyes and skin is dangerous. 
If tyre sealant enters the eyes or 
contacts the skin, 

fl

 ush immediately 

with large amounts of water and 
seek medical assistance. 

CX-3_8FU7-EE-16J_Edition2.indb   22

CX-3_8FU7-EE-16J_Edition2.indb   22

2016/11/24   15:39:57

2016/11/24   15:39:57

Summary of Contents for 2 2016

















































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments