Mazda 2 2016 Owner'S Manual Download Page 559

Page: 559 / 720

6–33

Maintenance and Care

Owner Maintenance

1. Raise the wiper arm and rotate the

wiper blade to the right until it unlocks,
then remove the blade.

CAUTION

To prevent damage to the rear window,
do not let the wiper arm fall on it.

2. Pull down the blade rubber and slide it

out of the blade holder.

3. Remove the metal stiffeners from the

blade rubber and install them in the
new blade.

CAUTION

Do not bend or discard the stiffeners.
You need to use them again.

4. Carefully insert the new blade rubber.
Then install the blade assembly in the

reverse order of removal.

CX-3_8FU7-EE-16J_Edition2.indb 33

2016/11/24 15:39:31

Summary of Contents for 2 2016

















































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2 2016

Reviews:

Mazda 2 2016, Owner'S Manual, Page: 559 / 720

Search results

Summary of Contents for 2 2016

Reviews: