manualshive.com logo in svg

Mazda 2 2016, Owner'S Manual, Page: 283 / 720

Share
Download
Mazda 2 2016 Owner'S Manual Download Page 283

4–145

When Driving

i-ACTIVSENSE

 NOTE



  During headway control travel, the system accelerates and decelerates your vehicle 

in conjunction with the speed of the vehicle ahead. However, if it is necessary to 
accelerate for a lane change or if the vehicle ahead brakes suddenly causing you to 
close in on the vehicle rapidly, accelerate using the accelerator pedal or decelerate 
using the brake pedal depending on the conditions. 



  While the Mazda Radar Cruise Control (MRCC) system is in use, it does not cancel 

even if the selector lever (automatic transaxle)/shift lever (manual transaxle) is 
operated and any intended engine braking will not occur. If deceleration is required, 
lower the vehicle speed setting or depress the brake pedal. 



  The brake lights are illuminated while the Mazda Radar Cruise Control (MRCC) 

automatic braking is operating, however, they may not be illuminated while the 
vehicle is on a down slope at the set vehicle speed or travelling at a constant speed and 
following a vehicle ahead. 



  The Mazda Radar Cruise Control (MRCC) warning light (amber) illuminates when the 

system has a malfunction. 

  Refer to Warning Lights on page  4-36 . 



  The headway control operation can be cancelled and the system can be switched to 

only cruise control. Refer to Cruise Control Function on page  4-152 . 

          Mazda Radar Cruise Control (MRCC) Display Indication

            The  setting  status  and  operation  conditions  of  the  Mazda  Radar  Cruise  Control  (MRCC) 
system are indicated in the active driving display.

 

Vehicle ahead display

MRCC Distance 
between vehicle 
display

MRCC Set vehicle speed

 

CX-3_8FU7-EE-16J_Edition2.indb   145

CX-3_8FU7-EE-16J_Edition2.indb   145

2016/11/24   15:37:15

2016/11/24   15:37:15

Summary of Contents for 2 2016

















































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments