Mazda 2 2016, Owner'S Manual

Page: 153 / 720

4–15
When Driving
Start/Stop Engine
     
The driver's seat belt is fastened.
     
The air conditioner is not operating with the air fl ow mode dial in the position.
     
(Automatic air-conditioning)
   

 
The temperature setting dial for the air-conditioning is set to a position other than
maximum heating/maximum cooling (A/C ON).
   

 
The vehicle's interior temperature and the set temperature for the air conditioner are
nearly the same.
     
The i-stop warning light (amber) is not turned on/ fl ashing.
     
The keyless entry & push button start system functions are normal.
     
The brake vacuum is suf fi ciently high.
     
The steering wheel is not being operated.
     
(Manual transaxle)
      
The vehicle speed is 3 km/h (1.8 mph) or less.
      
The shift lever is in the neutral position.
   

 
The clutch pedal is not depressed.
     
(Automatic transaxle)
      
The vehicle is stopped.
      
The selector lever is in the D or M position (not in second gear fi xed mode).
      
The automatic transaxle fl uid has warmed up suf fi ciently.
      
The automatic transaxle fl uid temperature is not abnormally high.
      
The steering wheel is almost in the straight-ahead position (idling may not stop even
with the steering wheel in the straight-ahead position if force is applied to the steering
wheel. Release the force applied to the steering wheel to stop engine idling).
      
The vehicle is stopped by depressing the brake pedal.
      
Emergency braking is not applied.
When the system is not operable
Engine idling does not stop in the following conditions:
     
The vehicle is stopped but the engine is kept idling.
     
The air conditioner is operating with the air fl ow mode dial in the position.
     
(Automatic air-conditioning)
      
The temperature setting dial for the air-conditioning is set to the maximum heating/
maximum cooling (A/C ON) position.
      
There is a large difference between the cabin temperature and the set temperature of the
air conditioner.
     
The ambient temperature is extremely high or low.
     
The atmospheric pressure is low (when driving at high altitudes).
CX-3_8FU7-EE-16J_Edition2.indb 15 CX-3_8FU7-EE-16J_Edition2.indb 15 2016/11/24 15:36:08 2016/11/24 15:36:08