Mazda 2 2016, Owner'S Manual

Page: 431 / 720

5–73
Interior Features
Audio Set [Type A (non-touchscreen)]
Commands useable anytime during
voice recognition
“Help” or “Go Back” are commands
which can be used at anytime during voice
recognition.
Help function use
The help function informs the user of all
the available voice commands under the
current conditions.
1. Say: [Beep] “Help”
2. Follow the prompts to receive the
appropriate voice guidance instructions.
Returning to previous operation
This command is for returning to the
previous operation while in the voice
recognition mode.
Say: [Beep] “Go Back”
To prevent a deterioration in the voice
recognition rate and voice quality, the
following points should be observed:
       
The voice recognition cannot be
performed while voice guidance or
the beep sound is operating. Wait
until the voice guidance or the beep
sound is
fi nished before saying your
commands.
     
Dialects or different wording other
than hands-free prompts cannot be
recognised by voice recognition. Speak
in the wording speci
fi ed by the voice
commands.
     
It is not necessary to face the
microphone or approach it. Speak the
voice commands while maintaining a
safe driving position.
     
Do not speak too slow or too loud.
     
Speak clearly, without pausing between
words or numbers.
     
Close the windows and/or the sunroof
to reduce loud noises from outside
the vehicle, or turn down the air
fl ow
of the air-conditioning system while
Bluetooth
®
Hands-Free is being used.
     
Make sure the vents are not directing air
up towards the microphone.
NOTE
If the voice recognition performance is
not satisfactory.
Refer to Voice Recognition Learning
Function (Speaker Enrolment) (Type A)
on page 5-74 .
Refer to Troubleshooting on page
5-76 .
CX-3_8FU7-EE-16J_Edition2.indb 73 CX-3_8FU7-EE-16J_Edition2.indb 73 2016/11/24 15:38:22 2016/11/24 15:38:22