2-5-15
PAGE 1 OF 5
UTV FRONT RACK
MODEL: UVFR751
READ ALL INSTRUCTIONS & WARNINGS BEFORE USING THE UTV FRONT RACK
NOTE: Failure to read instructions before use could result in injury or death.
Instructions for Installation and Use:
*Note: UTV
’s with Round Roll Bar Cages – Refer to Pages 1-4 of this installation Guide
*Note: UTV Front Rack Will NOT FIT Polaris Ranger 570 Midsized UTV with Pro-Fit Roll Cage
*
Note: IF INSTALLING ON POLARIS Ranger 570 Full Sized w/ Pro Fit Cage OR Ranger 900/1000 w/ Pro Fit Cage- REFER TO PAGE 5.
CONTENTS
Contents:
1
– UTV FRONT RACK
2
– F SHAPED HORIZONTAL RACK SUPPORTS
1 SET
– ROLL BAR ANGLE BRACKETS
*THESE
HAVE 3 HOLES ON 1 SIDE. THERE IS A LEFT AND
A RIGHT BRACKET.
1 SET-
ROLL BAR ANGLE BRACKETS FOR
VEHICLES WITH WINDSHIELD
. (SEE NOTE #1)
2 SETS
– BRUSH GUARD ANGLE BRACKETS
*THESE
HAVE 2 HOLES ON 1 SIDE AND 1 HOLE ON THE
OTHER SIDE. CHOOSE WHICH SET WORKS BEST
WITH YOUR VEHICLE.
2
– 5/16” X 2 1/4” BOLTS &
2 –
5/16” WINGKNOBS
4
– 5/16” X 2” U-BOLTS
16
– 5/16” LOCKNUTS
8
– 1/4” LOCKNUTS
4
– 1/4" X 3 1/2" BOLTS
4
– 1/4" X 1 3/4" BOLTS
2- 5/16” X 3 1/2'” BOLTS
2- 5/16” X 1 1/4” BOLTS
4
– THIN NYLON WASHERS
2 –
MEDIUM NYLON WASHERS
52
– FLAT WASHERS
4
- PLUGS
4
– SETS OF VERTICAL SUPPORT BARS (VARIOUS
LENGTHS)
