manualshive.com logo in svg

Mazda 2 2016, Owner'S Manual, Page: 148 / 720

Share
Download
Mazda 2 2016 Owner'S Manual Download Page 148

4–10

When Driving

Start/Stop Engine

  If the engine cannot be started due to a 
dead key battery, the engine can be started 
using the following procedure:

  

   1.   Continue to depress the brake pedal 

fi

 rmly until the engine has completely 

started.

   2.    

(Manual transaxle)

 

    Continue to depress the clutch pedal 

fi

 rmly until the engine has completely 

started.

   3.   Verify that the push button start 

indication light (green) 

fl

 ashes.

   4.   Touch the push button start using the 

backside of the key (as shown) while 
the push button start indicator light 
(green) 

fl

 ashes.

   

 

P

u

sh b

u

tton start

Transmitter

Indicator light

 

 NOTE

 When touching the push button start 
using the backside of the key as shown 
in the illustration, touch the push button 
start with the lock switch side of the key 
facing up. 

   5.   Verify that the push button start 

indicator light (green) turns on.

   6.   Press the push button start to start the 

engine.

 NOTE



  The engine cannot be started unless 

the clutch pedal is fully depressed 
(manual transaxle) or the brake 
pedal is fully depressed (automatic 
transaxle). 



  If there is a malfunction with the 

push button start function, the push 
button start indicator light (amber) 

fl

 ashes. In this case, the engine may 

start, however, have the vehicle 
checked at an expert repairer, we 
recommend an Authorised Mazda 
Repairer as soon as possible. 



  If the push button start indicator light 

(green) does not illuminate, perform 
the operation from the beginning 
again. If it does not illuminate, 
have the vehicle checked at an 
expert repairer, we recommend an 
Authorised Mazda Repairer. 



  To switch the ignition position 

without starting the engine, perform 
the following operations after the 
push button start indicator light 
(green) turns on. 

 

   1.   Release  the  clutch  pedal  (manual 

transaxle) or brake pedal 
(automatic transaxle).

   2.   Press the push button start to 

switch the ignition position. The 
ignition switches in the order of 
ACC, ON, and off each time the 
push button start is pressed. To 
switch the ignition position again, 
perform the operation from the 
beginning.   

CX-3_8FU7-EE-16J_Edition2.indb   10

CX-3_8FU7-EE-16J_Edition2.indb   10

2016/11/24   15:36:06

2016/11/24   15:36:06

Summary of Contents for 2 2016

















































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments