Mazda 2 2016, Owner'S Manual, Page: 530 / 720

6–4
Maintenance and Care
Scheduled Maintenance
Maintenance 1st 2nd 3rd 4th 5th 6th 7th 8th 9th 10th 11th 12th
Rear differential oil
*11*12
Transfer oil
*12
Front and rear suspension, ball joints and
wheel bearing axial play
I I I I I I
Driveshaft dust boots I I I I I I
Exhaust system and heat shields Inspect every 80,000 km (50,000 miles) or 5 years.
Bolts and nuts on chassis and body T T T T T T
Body condition (for rust, corrosion and
perforation)
I I I I I I I I I I I I
Cabin air fi lter (if installed) R R R R R R
Tyres (including spare tyre) (with in fl ation
pressure adjustment) *13*14
I I I I I I I I I I I I
Emergency fl at tyre repair kit (if installed)
*15
I I I I I I I I I I I I
Chart symbols:
I : Inspect: Inspect and clean, repair, adjust, fi ll up, or replace if necessary.
R : Replace
C : Clean
T : Tighten
D : Drain
Remarks:
*1 In the countries below, inspect the spark plugs at every 10,000 km (6,250 miles) or 12 months before replacing
them at the said interval.
Albania, Bosnia and Herzegovina, Bulgaria, Croatia, Latvia, Macedonia, Moldova, Montenegro, Romania,
Serbia, Slovakia, Ukraine
*2 If the vehicle is operated in very dusty or sandy areas, clean and if necessary, replace the air fi lter more often
than the recommended intervals.
*3 Implement the fuel injection amount correction.
*4 Also inspect the air conditioner drive belts, if installed.
If the vehicle is operated primarily under any of the following conditions, inspect the drive belts at every
20,000 km (12,500 miles) or 12 months.
a) Driving in dusty conditions
b) Extended periods of idling or low speed operation
c) Driving for long period in cold temperatures or driving regularly at short distance only
d) Driving in extremely hot conditions
e) Driving in mountainous conditions continually
CX-3_8FU7-EE-16J_Edition2.indb 4 CX-3_8FU7-EE-16J_Edition2.indb 4 2016/11/24 15:39:19 2016/11/24 15:39:19