Maxtor Maxtor OneTouch USB, User Manual

Page: 65 / 268

Disaster Recovery 61
5
English
11. Select your most recent backup set and click OK .
A window will appear asking you: ‘Are there any more disks in
the Backup set?’
12. Click the No button.
The next window appears where you can save your catalog file.
The file will automatically be placed in Retrospect Catalog Files
folder inside your My Documents folder on your hard drive. If
you’d prefer, you can specify a new location.
13. Click Save .
The Recatalog window will now appear.
14. Click Build Catalog File .
A window will appear asking you: ‘Are there any other
members in this Backup Set?’
15. Click No .
Retrospect will now build the new catalog file and the
message: ‘Execution completed successfully’ should appear.
16. Click Close .
Now, it’s time to restore your system.
17. Click Restore on the left side of the screen.
The Restore Overview window will appear.
18. Click Entire Volume .
A window will appear, asking you to select the ‘Source
Snapshot for restore.’
19. Select your Backup Set at the top of the window.
Select your C:Drive at the bottom of the window
20. Click OK .
The next window will ask you to specify a ‘Destination for
the restore.’
21. Select the drive that you want to restore and make sure that
‘Restore Entire Volume’ is selected in the drop-down menu.
22. Click OK .
A window appears asking if you really want to restore.
23. Click Replace .
The system restore will now begin.
This may take several minutes.
When it finishes, you should see the message: ‘Execution
completed successfully.’
24. Exit Retrsopect by going to the File menu and choosing Exit .
25. Restart your computer.
Your system may require more than one restart. Follow any
additional onscreen instructions, if necessary, to complete
your system restore.