Maxtor Maxtor OneTouch USB, User Manual, Page: 25 / 268

Installing Your Drive 21
2
English
The OneTouch button may not function when Retrospect
is already running. To correct the problem, go to the
File
menu in Retrospect, and choose Exit .
Your hardware and software installation is now complete. See
“Using Your Drive” on page 37 in chapter 3, for information on
using your drive for common applications and on using Retrospect
to make copies of your important files and restore copied files.
Macintosh OS X: Installing the Software
1. Turn on your computer
2. Insert the Maxtor Installation CD into your CD-ROM drive.
After a few seconds, the Install CD should appear on your
Macintosh’s desktop.
3. Open the Install CD Icon.
4. Find the folder appropriate for your language and open it.
5. Double-click the Install Retropsect Express icon .
The Authenticate window will open.
6. Enter your Name and Password for your OS X system.
(This is the Name and Password you set up when you
originally installed OS X)
Click OK.
The Retrospect Express Installer will open.
7. Click Continue.
The license screen will appear.
8. Review license agreement and Accept to continue.
The Install Retrospect Express screen will appear.
9. This screen allows you to specify what type of installation
you want and where. It is automatically setup to do a Full
Installation (Recommended) into the Applications folder on
your Macintosh.
You can select a Custom Installation, using the Easy Install
menu, as well as change the location of the installation using
the
Install Location menu at the bottom of the screen.
When you are ready, Click Install.
The installation will begin.
10. When the installation is complete, the Installation was
successful screen should appear, asking you to Restart.
11. Click Restart.
12. After your Macintosh restarts, please remove the Maxtor
Install CD from your computer.
13. Proceed to the next section: Connecting the Drive.