Page 53 P/N 03521015 Rev U1
Bio-Medical Devices Intl
17171 Daimler Street Irvine, CA 92614 800-443-3842 www.maxair-systems.com
•
Alternative A is doffing the Helmet leaving the DLC attached for the next use.
•
Alternative B is removing the DLC for disposal and doffing the Helmet.
Doff the System: Alternative A
1. Loosen the rear Headband
Adjustment Knob (turn
counterclockwise).
2. Pull the DLC Cuff away from the chin
and lift the Helmet up, forward, and off
the head.
3. Disconnect the Helmet Power Cord
from the Battery - push the Secure
Connection Button down, pull Cord
Connector out, release the Button.
4. Disconnect the Battery Belt from
around the waist by
un-snapping the buckle.
5. With the Charger connected to the
mains wall power, connect the Charger
Cord to the Battery. Push the Charger
Cord Connector into the Battery
Receptacle until it is fully seated.
6. The entire CAPR System may be
decontaminated, cleaned and/or
stored at this time.
7. If desired, the components
of the CAPR System may
be disassembled and each
component decontaminated,
cleaned and/or stored at this
time.
There are two alternative protocols for doffing the DLC System
