Matrox DigiSuite LX MAX, User & Installation Manual

Page: 58 / 160

46
Chapter 5, Connecting Your External Devices
75-ohm termination
The jacks labelled REF on DigiConnect/Video enable you to terminate the
sync signal (with the provided 75-ohm
terminator) or have it loop through.
When using DigiConnect/ Video or another device for termination, make
sure the termination switch on DigiSuite LX is set to Hi Z (see
“Set the
termination switch on DigiSuite LX” on page 24 ).
Video outputs
The DigiConnect/Video breakout box for use with DigiSuite LX MAX
supports any of the following combinations of video output connections:
✃
One S-Video and one composite connection (Preview).
✃
One S-Video and one composite connection (Program).
✃
One analog component connection (Program).
Preview output
The preview output signal is always present at both video preview output
jacks.
Program output
The PROGRAM OUT switch allows you to choose analog component or
S-Video and composite for your output connections.
REF
75-ohm terminator (supplied)
S-VIDEO COMPOSITE
PREVIEW OUT
R-Y B-Y Y S-VIDEO COMPOSITE
PROGRAM OUT MODE