Matrox DigiSuite LX MAX, User & Installation Manual

Page: 55 / 160

43
DigiSuite LX MAX DigiConnect/Video breakout box
Attaching the desktop pedestals
1 Unpack the two desktop pedestals and their four long mounting
screws.
2 Line up each pedestal with its respective screw holes on the bottom of
the breakout box.
3 Using a hand screwdriver only ( no power screwdrivers ), carefully
tighten each screw until snug. Do not overtighten !
Attaching the rackmount brackets
1
Unpack the two rackmount brackets and their eight short mounting
screws.
Do not use the long screws!
2
Line up each bracket with its respective screw holes on the side of the
breakout box.
3
Using a hand screwdriver only ( no power screwdrivers ), carefully
tighten each screw until snug. Do not overtighten !
KEY
OUT R-Y B-Y Y S-VIDEO COMPOSITE S-VIDEO COMPOSITE
PREVIEW OUT
PROGRAM OUT MODE
REF IN 1
S-VIDEO Y/COMPOSITE R-Y B-Y COMPOSITE
IN 2
S-VIDEO
IN MODE
S-VIDEO/COMPOSITE
COMPONENT ONLY
75-ohm terminator (supplied)
Di gi tal Vi deo Sol uti ons
Right rackmount bracket Left rackmount bracket