Matrox DigiSuite LX MAX, User & Installation Manual

Page: 56 / 160

44
Chapter 5, Connecting Your External Devices
Connect DigiConnect/Video to your computer
Attach the connector on your breakout box cable to the video bracket
connector on the backplate of your installed DigiSuite LX. Tighten the
thumb screws until snug to ensure a stable connection.
°Important
Do not bend the attached cable too sharply. Excessive
bending or flexing can damage internal, shielded wires.
Choosing your connection signal options
As you can see by reading the front panel labels, DigiConnect/Video offers
several signal options.
¯Note
The front switches on DigiConnect/Video are all recessed to
prevent unwanted changes. Use a small screwdriver or other appropriate
object to change the settings as required.
Video input
The DigiConnect/Video breakout box supports any of the following
combinations of video connections:
✃
Two S-Video (Y/C) connections.
✃
Two composite connections.
✃
One S-Video and one composite connection.
✃
One analog component and one composite connection (for this
combination, you’ll have to change the IN MODE setting on the
DigiConnect/Video
Video
bracket
connector
Audio
bracket
connector
Bottom
Top of DigiSuite LX