Matrox DigiSuite LX MAX, User & Installation Manual

Page: 40 / 160

28
Chapter 4, Installing Your DigiSuite LX MAX Hardware
5
Since there are two
connectors for DigiSuite
LX on the Movie-2 bus,
it’s easiest to connect this
card first. Lay your
DigiSuite LX on its side
and carefully install the
Movie-2 bus into the
matching connectors on
the card. Insert the
mounting screw through
the top of the Movie-2 bus
and secure it to the card.
6 Flip the assembled card and
Movie-2 bus over with the bus
underneath. Rest the plate end
of the DigiSuite LX card on a
flat surface and place one
hand under the Movie-2 bus
while installing the MAX card
with your other hand.
7 Flip the entire unit over and insert the remaining mounting screws
through the top of the Movie-2 bus. Avoid putting too much stress on
the Movie-2 bus.
DigiSuite LX
MAX
Digital module
DigiSuite LX
Movie-2 bus
connector
MAX