Matrox DigiSuite LX MAX, User & Installation Manual

Page: 62 / 160

50
Chapter 5, Connecting Your External Devices
Typical DigiSuite LX MAX video connections
°Important
Make sure that you insert your DigiSuite LX MAX analog
video cable or video breakout box cable into the proper bracket connector.
To locate the video bracket connector on DigiSuite LX, see
“Identifying
your connectors” on page 34 .
Illustrations in the following section show some typical video connections.
In these illustrations we’ve connected a Program monitor (NTSC, PAL or
digital) to view the signal that will be recorded, as well as separate source
and record decks (except in the DV-1394 illustration, which shows a single
deck). You may, however, use the same deck as both your source and
record device by making the input and output connections to a single deck.
Source External
sync source
Program
monitor
Recorder