Matrox DigiSuite LX MAX, User & Installation Manual

Page: 20 / 160

8
Chapter 2, Preparing Your DigiSuite System for Upgrading to DigiSuite LX MAX
Upgrading to DigiSuite LX MAX
This chapter assumes you’re upgrading your existing DigiSuite LX system
to DigiSuite LX MAX. If you’re preparing for a new DigiSuite LX MAX
installation, see
Chapter 3, “Preparing Your System for a New
Installation .”
Check our web site for recommendations
We’re constantly testing the latest available computer systems and
motherboards that meet or exceed the recommendations outlined in
“DigiSuite LX MAX system requirements” on page 4 . To read the test
results and recommendations on configuring systems for use with
DigiSuite LX MAX, you can check the System Recommendations in the
DigiSuite Customer Support section of our web site at
www.matrox.com/
videoweb/support.
Installation overview
The following steps summarize the four-step installation process for
DigiSuite LX MAX.
°Important
Please do not attempt to install any of the components or
software without reading the detailed instructions that follow. Failure to do
so may result in broken parts and/or system malfunctions. Do it right the
first time!
1 Prepare your system as outlined in this chapter. This includes
uninstalling DigiUtils, shutting down your computer and removing
your DigiSuite hardware, installing your Matrox display card (if
needed), updating your display driver, and configuring your display.
2 Carefully install your DigiSuite LX MAX as explained in Chapter 4,
“Installing Your DigiSuite LX MAX Hardware,” on page 19 .
3 Connect your external devices. See Chapter 5, “Connecting Your
External Devices,” on page 33 .
4 Install your DigiSuite software as detailed in Chapter 6, “Installing the
DigiSuite LX MAX Software,” on page 59 .