User Manual |
MI-CLARITY3D SA
User Manual |
MI-CLARITY3D
User Manual |
MI-CLARITY3D
©
MASTERIMAGE 3D, Inc.
53
3. Hold the PFD steady with one hand, and while applying gentle pressure, carefully wipe the PFD
with the cleaning cloth. Wipe from the center of the PFD to the outer edge only. See the
illustration below.
Cleaning the PFD surface
4. Rotate the PFD slightly with the other hand between each upward wipe of the cloth. Refold the
cloth after every 2 or 3 wipes in order to maintain a clean cloth surface on the PFD.
5. Continue to rotate and wipe the PFD until one side of the filter is clean. Use the black sensor
mark to indicate when the entire PFD has been wiped.
6. Switch hands or sides and repeat the process for the other side of the PFD, as shown in the
illustration below:
7. Repeat the cleaning process if required in order to completely remove any dirt or residue on the
PFD.
Clean the other side
Black sensor mark
Wipe in one
direction only,
from the center
– out to the
edge
Rotate slowly after
wiping each
section
