User Manual |
MI-CLARITY3D SA
User Manual |
MI-CLARITY3D
User Manual |
MI-CLARITY3D
©
MASTERIMAGE 3D, Inc.
20
In this condition it is important that the PFD itself is refitted the opposite way maintaining
the polarizing material facing the screen. (See
Orienting the MI-CLARITY3D in front of
the Digital Projector, page 13
Should the above installation condition be necessary, then the 3D setting for L/R Output
Reference Polarity or 3D Sync Polarity should be changed to
Inverted
.
Always make sure that 3D material is viewed on screen to ensure no artifacts are
present.
Note:
If you plan to change any of the settings shown below, first contact
MASTERIMAGE technical support for details see Section 1.2. (
NEC Series II file settings for external server playback
Note:
Settings for NEC where the projector Firmware Release Pack is lower than v2.33
are different from both Christie and Barco file configurations. This projector
should have the L/R Input Reference field set to Use selected Input port
(polarity=true). It may also be necessary to switch the Input Frame Dominance
when viewing the on screen image.
