User Manual |
MI-CLARITY3D SA
User Manual |
MI-CLARITY3D
User Manual |
MI-CLARITY3D
©
MASTERIMAGE 3D, Inc.
31
8.3.1. Moving FHA to a Predetermined 3D Position
1. To move the FHA to a predetermined 3D position from the
standby condition, press and hold the
3D
button.
The display shows its status as
3D POSITION
while moving
the FHA to a predetermined 3D position.
2. Press
2D
or
RUN/STOP
button to immediately stop the
motion of the PFD.
8.4.
Setting a 2D Position
Note:
The Factory Default setting is N/A.
1. To set a 2D position for the FHA from the standby condition,
press and hold the
MENU
key.
2. Press
UP
or
DOWN
key to select
2D POSITION
menu in the
SETUP screen.
3. Press
ENTER
key to set a 2D position of FHA.
4. Press the
UP
or
DOWN
key to move the FHA position up or
down.
The FHA goes up or down quickly while pressing the
UP
or
DOWN
key.
The NEW value shows current position of the FHA.
5. Press
LEFT
or
RIGHT
key to select CANCEL, OK or NEW
value.
6. Press and hold the
ENTER
key on selecting
CANCEL
to
return to the SETUP screen without saving new 2D position
