User Manual |
MI-CLARITY3D SA
User Manual |
MI-CLARITY3D
User Manual |
MI-CLARITY3D
©
MASTERIMAGE 3D, Inc.
40
8.11.
Ethernet Configuration
Note:
Factory Default settings are:
IP= 192.168.000.101
SUBNET MASK= 255.255.255.000
GATEWAY= 192.168.000.001
PORT NUMBER= 5000
The items that require configuration are IP, SUBNET MASK, GATEWAY and PORT.
1. To configure Ethernet from the standby condition, press and
hold the
MENU
key.
2. Press
UP
or
DOWN
key to select 11.SET ETHERNET menu
in the SETUP screen.
3. Press
ENTER
key to configure Ethernet.
4. Press
UP
or
DOWN
key to select previous or next
configuration item in the list.
The options for Ethernet configuration include IP, SUBNET
MASK, GATEWAY and PORT.
5. Press the
ENTER
key on selecting
EXIT
to return to the
SETUP screen.
To Set the IP Address
1. Press
ENTER
key on selecting 1.IP to change IP address.
The display shows the current IP address.
2. Press
UP
or
DOWN
key to increment or decrement the
selected value.
3. Press
LEFT
or
RIGHT
key to select any IP address, CANCEL,
or SAVE.
4. Press and hold the
ENTER
key on selecting
CANCEL
to
return to the SET ETHERNET screen without saving new IP
address.
5. Press and hold the
ENTER
key on selecting
SAVE
to return to
the SET ETHERNET screen after saving new IP address.
