User Manual |
MI-CLARITY3D SA
User Manual |
MI-CLARITY3D
User Manual |
MI-CLARITY3D
©
MASTERIMAGE 3D, Inc.
19
5.3.3. Releasing the footpads to move the MI-CLARITY3D
Turn the orange ring to the left (clockwise) to raise each footpad to release it and move
the MI-CLARITY3D.
5.4.
Projector File Setup
It is necessary to configure the projectors 3D control file to work with the
MI-CLARITY3D. The procedures below describe configuring the control files for
Series I and Series II projectors. Follow the instructions for the appropriate projector.
Recommended Dark Time Reference Settings:
Frame Rate
2:2
4:2
6:2
Remark
24fps
N/A
1740
1160
D-Cinema
25fps
N/A
1670
1110
3D Live Broadcast
30fps
N/A
1390
N/A
3D Live Broadcast
48fps
1740
TBA
N/A
High Frame Rate
60fps
1390
N/A
N/A
High Frame Rate
5.4.1. Series II Projectors
Configure the projector settings as shown in the illustrations below for NEC, Christie and
Barco projectors. Please also note the following:
Note:
In certain installations, where space is restricted in front of the projector or where
the lens protrudes a long way, it may be necessary to install the MI-CLARITY3D
the opposite way around, that is, with the PFD motor under the lens.
Turn the orange ring to the left to
raise each footpad to release it and
move the MI-CLARITY3D.
