Maschio JUMBO RAPIDO 6000, Use And Maintenance

Page: 71 / 114

cod. F07011381
min. 95 mm
1
1
1
Posizione corretta della protezione laterale
rispetto il rullo.
Side protection correct position with respect
to the roller.
Position correcte de la protection laterale par
rapport au rouleau.
Richtige Lage der seitlichen Schutzvor-
richtungen der Walze Gegenüber.
Posición correcta de la protección lateral
respecto al rodillo.
0 mm
fi g.57 fi g.58
fi g.59
fi g.60
fi g.61
fi g.62
USE AND MAINTENANCE
ENGLISH
EN - 71
Lower the machine slowly to allow the blades to gradually
penetrate the soil. Do not allow it to drop violently on to the
ground. To do this would strongly stress all the machine
components and could damage them.
4.17 HOW IT WORKS
Engage the pto according to the desired degree of soil working
and the work depth of the machine. Now begin to advance with the
tractor, progressively lowering the machine into the soil.
Cover a short distance and then check whether the desired effect
is obtained.
The work depth for machines with rear rollers is established by
adjusting the roller by means of the central or side jacks (mechani-
cal or hydraulic).
CAUTION
In order to prevent breakages or damage, the speed of the
tractor must never exceed 8 Km/hour when the implement is
working (
fi g.64).
DANGER
Stones or other sharp objects may be thrown up by the turn-
ing tines during the soil working phase.f±lways constantly
check that there are no persons, children or domestic animals
in the
fi eld of action of the machine. The operator must also
pay attention to the above.
In order to be able to work on terrain that is not completely level
(hills, small hollows or rises), the power harrow can become fl oat-
ing by operating on the distributor lever, keeping it pushed (fi g.65).