1
1
2
2
M
Set the switch to “EXTRUDER” (figure M). Start the
appliance pushing the “ON-OFF” button.
After a few seconds the pasta will begin to come out of
the die’s holes. Let the pasta out until it’s smooth and well
defined. Cut the pasta obtained using the cutting arc (figure
N).
Shapeless pasta can be reused by putting it into the mixing
tank or trough the rollers.
Remove all attachments from the appliance.
The pasta you’ ve obtained can be placed for a few hours on floured trays or on Tearet Marcato, convenient
stackable dry pasta (figure O).
To preserve pasta longer (2-3 weeks) place it in the freezer still wet in the special bags or containers.
4 - HOW TO MAKE ExTRUDED PASTA
P
Q
R
S
N
O
To connect the attachments to the appliance’s body, follow these
instructions: lean each attachment to the holes 16 and 17 keeping a 30º
angle (figure P) and rotate it until it stops.
After making the dough as described on paragrapher no. 3, open the top
cover and take the dough out of the mixing tank. To simplify the operation,
stop the appliance when the dough is on the top of the mixing tank.
Cut the dough in 4-5 pieces and cover them with a slightly humid
kitchen towel.
Set the regulating knob (figure Q) on number 0 pulling it outwards and
then turning it to open the rollers at their maximum distance (~ 3 mm).
Set the switch to “MIXER” (figure R) and start pushing the “ON/OFF” button (figure S).
5 - HOW TO MAKE A PASTA SHEET
30
31
