By using “PM2” encoder, user can set the gain of current parametric equalization filter from -15dB
to +15dB, and by using “PM3” encoder, it is possible to set the Q factor of current parametric
equalization filter from 0.4 to 128.
When the parametric equalization filter is selected as Hi-Shelv 1/ Hi-Shelv 2/ Lo-Shelv 1/ Lo-Shelv
2, by rotaing “PM1” encoder again, user can enter the setting interface 4 of current input
parametric equalization filter:
By using “PM2” or “PM3” encoder, it is possible to set current input PEQ filter’s frequency from the
range of 20Hz to 20kHz.
By rotaing “PM1” encoder again, user can enter the setting interface 5 of current input parametric
equalization filter:
By using “PM2” or “PM3” encoder, user can set the gain of current parametric equalization filter
from -15dB to +15dB.
When the parametric equalization filter is selected as Hi-Shelv Q/ Lo-Shelv Q, by rotaing “PM1”
encoder, user can enter the setting interface 6 of current input parametric equalization filter:
By using “PM2” or “PM3” encoder, it is possible to set current input PEQ filter’s frequency from the
range of 20Hz to 20kHz.
By rotaing “PM1” encoder again, user can enter the setting interface 7 of current input parametric
equalization filter:
By using “PM2” encoder, user can set the gain of current parametric equalization filter from -15dB
to +15dB, and by using “PM3” encoder, it is possible to set the Q factor of current parametric
equalization filter from 0.1 to 5.1.
When the parametric equalization filter is selected as Low-Pass 1/ Low-Pass 2/ High-Pass 1/ High-
Pass 2, by rotaing “PM1” encoder, user can enter the setting interface 8 of current input
parametric equalization filter:
In-A In-A PEQ-01
->Gain=0.0dB Q=0.40
In-A In-A PEQ-01
->Frequency = 20Hz
In-A In-A PEQ-01
->Gain=0.0dB Q=Fixed
In-A In-A PEQ-01
->Frequency = 20Hz
In-A In-A PEQ-01
->Gain=0.0dB Q=0.1
Summary of Contents for DPA480
Page 1: ...DPA480 User Manual...
Page 40: ......
