Marani DPA480, User Manual

Page: 26 / 41


Menu “Output 1/2/3/4/5/6/7/8” Output Channels Editing [access by pushing
the “1/2/3/4/5/6/7/8” buttons]
From the “Default Screen”, it is possible to access the “Output 1/2/3/4/5/6/7/8” menu by pressing
the “1” or “2” or “3” or “4” or “5” or “6” or “7” or “8” button. Once pressed, the related blue “EDIT”
LED will turn ON.
The Sub-Menus pages can now be scrolled through by rotating clockwise and counter-clockwise
the “PM1” encoder.
For parameter editing it is necessary to press ENTER and an arrow will appear on the left of the
screen “->”. Then use the “PM2” and “PM3” encoders for selecting and setting the parameter
values. On some parameters that have three independent values, you will also need to use the
PM1 encoder, for example for the filter’s parameter setting.
Note: All parameter editing can be done using the “PM1”, “PM2”, and “PM3” encoders and the
current shown value of the selected option is AUTOMATICALLY loaded during the encoders' use
and stored as the current value once leaving the page.
Audio Signal Output (1/2/3/4/5/6/7/8)
Name page – from this screen, it is possible to assign output channel a name with 6 characters
For example, name the Output 1 as “Low” in the Name Page:
By pressing ENTER in the Name page, user can edit the name, and there will be an arrow, as the
following screen shows:
The first character will flash.
Select character from these 6 positions by using “PM2” encoder and choose the desired characters
by rotating “PM3” encoder. Once the new name is defined, for example, “Sub”, confirm this new
name by pressing ENTER… A new name will display on the screen, after replaced the old one.
The following screen is shown with the new name “Sub”, by replacing the previous one “Low”
Routing page – in this page, it is possible to assign input “A/B/C/D” to any output channel:
Out-1 Out 1 Name
Name = Low
Out-1 Out 1 Name
-> Name = Low
Out-1 Sub Name
Name = Sub
Out-1 Out 1 Routing
A=0dB B=OFF C=OFF D=OFF