Marani DPA480, User Manual

Page: 9 / 41


Menu “UTILITY” [access by pushing the “UTILITY” button]
From the “Default Screen”, it is possible access the “UTILITY” menu pushing the “UTILITY” button
and the Sub-Menus pages can be selected just rotating clockwise and counter-clockwise the
“PM1” encoder.
Once selected the sub-menu page, using the “ENTER” button can be accessed the Sub-Menus
pages, again “scrollable” using the “PM1” encoder and accessible for the parameters' editing
pushing again the “ENTER' button.
Note: In each sub-menu choice, the current selected or running choice is what shown on the LCD
screen.
System Utilities Sub-menu – this sub-menu allows to access several operations related to the
DPA480 Start Up and General Configuration:
UTILITY MENU:
From the “System Utilities Sub-menu”, pushing “ENTER” and then using the “PM1” encoder for
scrolling will give access to the following pages:
−
Input Source: the DPA480 is equipped with 4 Analog Inputs (Balanced Female XLR) and 2
AES Digital Input (RCA connector).and noise generator
The “Input Source” page allows you to select the desired Input type:
By pressing ENTER on Input Source and then rotating the “PM2” or “PM3” encoders, it is
possible to select the Main Inputs for the DPA480, allowing the User to choose between
Analog , AES Digital Input or Noise Generator.
The selection can be confirmed by pressing the “ENTER” button.
The following screen shows that the Analog Input has been selected:
UTILITY MENU:
UTILITY MENU
-- System Utilities --
SYSTEM UTILITY
-- Input Source --
Input Source
Source = Analog input