Marani DPA480, User Manual

Page: 15 / 41

For example, if we want to delete the preset 10, “Stage 1 2x2”, the screen will be the
following:
Confirming the deletion by pressing “ENTER” again, will force the DPA480 to erase the selected
preset and the following transitory screen will appear:
Once the preset is deleted, the above screen will disappear returning to the following screen:
Note: At any time it is possible to quit the deleting action by pressing the “ESC” button.
Interface Utilities Sub-menu – this sub-menu allows you to define the remote control interface
[USB, RS485 or TCP/IP] to be used for controlling the DPA480:
From “Interface Utilities”, press “ENTER” button to access the Interface Setup.
−
Interface Setup: this screen allows you to choose the communication source for the DPA480.
If select RS485, connect more than one unit under the RS485 mode. By using “PM3” encoder,
user can set the ID number from 1 to 32, to assign to the units connected, and confirm by
pressing “ENTER” button.
If select TCP/IP, select the DHCP status by using “PM3” encoder, with choice of “ON” or “OFF”.
Interface Setup
Source=USB
UTILITY MENU
-- Interface Utilities --
PROGRAM UTILITY
-- Delete a Program --
Erasing Xover Memory.....
10: Stage 1 2x2
[ENTER] to Delete.
10: Stage 1 2x2
Interface Setup
Source=RS485 ID=01