Wait around 3 sec for the processor set to the default value.
−
Firmware Version: this page allows you to confirm the Firmware Version running on the
DPA480:
The correct Firmware Version is “V3.0.2”
Program Utilities Sub-menu – this sub-menu allows you to access several options related to
the DPA480 operating mode and to manage the presets stored and recallable within the Unit:
−
Recall a Program: this page allows the Loading of a preset program by pressing the “ENTER”
button. You can store up to 32 presets in the DPA480 memory:
By pressing “ENTER” button and rotating the “PM1” encoders, it is possible to scroll through all
current available presets.
If NO USER PRESETS are stored yet, the screen will show the following:
If presets have previously been stored by the user, anyone of them can be recalled:
By using the “PM1” encoder it is possible to scroll through the stored presets. Once the
Recall a Program
No Stored Programs
[ENTER] to Recall.
01: PRESET 1
PROGRAM UTILITY
-- Recall a Program --
UTILITY MENU
-- Program Utilities --
Set Default Value
Wait : loading default….
SYSTEM UTILITY
-- Firmware Version --
Summary of Contents for DPA480
Page 1: ...DPA480 User Manual...
Page 40: ......
