By using “PM2” or “PM3” encoder, it is possible to set current input PEQ filter’s frequency from the
range of 20Hz to 20kHz.
By rotaing “PM1” encoder again, user can enter the setting interface 14 of current input
parametric equalization filter:
By using “PM2” or “PM3” encoder, it is possible to set the Q factor of current parametric
equalization filter from 4 to 104.
When the parametric equalization filter is selected as All Pass 1, by rotaing “PM1” encoder, user
can enter the setting interface 15 of current input parametric equalization filter:
By using “PM2” or “PM3” encoder, it is possible to set current input PEQ filter’s frequency from the
range of 20Hz to 20kHz.
When the parametric equalization filter is selected as All Pass 2, by rotaing “PM1” encoder, user
can enter the setting interface 16 of current input parametric equalization filter:
By using “PM2” or “PM3” encoder, it is possible to set current input PEQ filter’s frequency from the
range of 20Hz to 20kHz.
By rotaing “PM1” encoder again, user can enter the setting interface 17 of current input
parametric equalization filter:
By using “PM2” or “PM3” encoder, it is possible to set the Q factor of current parametric
equalization filter from 4 to 104.
Note 1: If selected the desired options by using 3 encoders, the option would be set as a current
one for the unit automatically, and will be stored in the DPA480 system when you exit the page.
Note 2: By pressing “ESC” button, you can exit the page any time.
In-A In-A PEQ-01
->Gain=Fixed Q=4
In-A In-A PEQ-01
->Frequency = 20Hz
In-A In-A PEQ-01
->Frequency = 20Hz
In-A In-A PEQ-01
->Gain=Fixed Q=4
Summary of Contents for DPA480
Page 1: ...DPA480 User Manual...
Page 40: ......
