By using “PM2” or “PM3” encoder, it is possible to set current input PEQ filter’s frequency from the
range of 20Hz to 20kHz.
By rotaing “PM1” encoder again, user can enter the setting interface 17 of current input
parametric equalization filter:
By using “PM2” or “PM3” encoder, it is possible to set the Q factor of current parametric
equalization filter from 4 to 104.
Note 1: After selected the desired choice with 3 encoders, the choice would be set as the current
one for the unit automatically, and would be stored in the DPA480 system when user quits this
page.
Note 2: By pressing “ESC” to quit this page.
Out-1 Out 1 PEQ-01
->Frequency = 20Hz
Out-1 Out 1 PEQ-01
->Gain=Fixed Q=4
Summary of Contents for DPA480
Page 1: ...DPA480 User Manual...
Page 40: ......
