3. Connect DPA480 with computer
Power on DPA480, use reticle to conect DPA480 with PC. Initiate the PC software, set
“communication port’’ to “TCP/IP” in the dialougue box. Then set “connection “to “with one device”
(if there are more than one units, set it as” with more devices”.)
Later set the “IP address” display the set PC IP: “Host Address: 192.168.0.2”. Set the “IP device” same
as the IP address of the DPA480. Note that in the example, the IP address of DPA480 is set as
192.168.0.100, so the “IP address” shall be set as 192.168.0.100, ,please refer to the following picture:
Click the
in the above image, will show the following interface, which means that the
DPA480 already connected to the PC via reticle, the connection between this unit and the PC by
TCP/IP completes.
Summary of Contents for DPA480
Page 1: ...DPA480 User Manual...
Page 40: ......
