Marani DPA480, User Manual

Page: 7 / 41

MENU “Output 1/2/3/4/5/6/7/8” Output Channels Editing [Access by pushing the “1/2/3/4/5/6/7/8”
button]
PM1 Encoder PM1 Enc. PM2 Enc. PM3 Enc.
[to navigate between menus] [to chose values for the parameters, no need to confirm the chosen values,
which are automatically loaded during the encoders use]
1. Output[x] [Name] Name
Name = [Name]
-> Name = _ (For Editing the Device's Name, refer to the Details on the“Utility Menus Use” Section)
2. Output[x] [Name] Routing
A=On B=Off C=Off D=Off
-> InA: Level=0dB On PM1 N/A 0 dB On/Off
:
-30dB
-> InB: Level=0dB Off PM1 N/A 0 dB On/Off
:
-30dB
-> InC: Level=0dB Off PM1 N/A 0 dB On/Off
:
-30Db
-> InD: Level=0dB Off PM1 N/A 0 dB On/Off
:
-30Db
3. Output[x] [Name] Gain
Gain = + 0.0 dB
-> Gain = + 0.0 dB PM1 N/A -18 dB 0.1dB
: :
+12dB 0.9dB
Step 1dB Step 0.1dB
4. Output[x] [Name] Delay
Delay = 0.000 ms
-> Delay = 0.000 ms PM1 N/A 000.0000mS 000.0000mS
[1 ms steps] [10.4 us steps]
270.0000mS 000.9984Ms
5. Output[x] [Name] Phase
Phase=Normal
-> Phase=Normal PM1 N/A. Phase= Normal/Invert
6. Output[x] [Name] RMS Cmp
Bypass=On
-> Bypass=On PM1 N/A. Byp=On/Off
PM1 N/A. Thr20dBu
… -10dBu
PM1 N/A. Ratio =2:1 … 32:1 Knee=0% … 100%
PM1N/A. Rel=0.1sec … 3.0sec Atk=5ms … 200ms
PM1 N/A. Make-up=-12dB … +12dB
7. Output[x] [Name] Limiter
Bypass=On
-> Bypass=On PM1 N/A. Bypass= On/Off
PM1 N/A. Threshold=-10dBu … 20 dBu
PM1 N/A. Rel=0.1sec … 5sec Atk=1ms … 900ms
8. Output[x] [Name] HPF
ENTER
ESC
ENTER
ESC
ENTER
ESC
ENTER
ESC
ENTER
ESC
ENTER
ESC
ENTER
ESC