Item
Safety device
Function
Check
1
Cover can only be re‐
moved using tool
Prevents live parts from
being touched accidentally
Prevents access to the
moving fan from the wiring
compartment
Check that the cover is in
place
2
Operating panel can
only be removed using
a tool
Prevents live parts from being
touched accidentally
Ensure that the operating
panel is in place
3
Appliance door with
magnetic door switch
Appliance door:
Protects the user and outside
environment from hot steam
Check the door pane regularly
for scratches, cracks, indenta‐
tions etc. and replace it if any
are found
Magnetic door switch (electri‐
cal door sensor):
When the appliance door
is opened, the switch
stops:
rotation of the fan
(comes to a stop after a
few seconds)
operation of the heating
element
distribution of the
cleaning fluids by the
fully automatic oven
cleaning system
Prompt to close the appli‐
ance door
Check magnetic door switch
at low temperature:
Action:
Open the appliance door
fully
Press Start
Result:
Motor must not start up
4
Suction panel in cook‐
ing chamber; can only
be removed using a
tool
Prevents access to the mov‐
ing fan and ensures good
heat distribution
See 'Releasing and securing
the suction panel' in the User
manual
5
For floor-standing
units:
Built-in preheat bridge
in appliance door
Prevents scalding from es‐
caping steam when the load‐
ing trolley is not in the appli‐
ance during preheating
None
6
For table-top units:
Venting position of ap‐
pliance door
Prevents scalding of user's
face and hands from escaping
steam
When appliance is at low tem‐
perature, check door positions
as described in 'Opening and
closing the appliance door
safely' in the user manual
7
(no picture)
Safety thermostat
Boiler
Cooking chamber
Switches off the appliance if
temperature too high
An error code is output in the
event of a fault
(Please contact an authorized
service company to reset the
safety thermostat)
8
(no picture)
Restart or forced rins‐
ing after power failure
in case cleaning fluid
was left in the appli‐
ance
Re-starts fully automatic oven
cleaning in a defined state af‐
ter power failure
None
9
(installed by
customer)
Disconnection device
Installed by the customer
close to the appliance;
easily visible and accessi‐
ble, 3-pole action, mini‐
mum contact separation 3
mm.
Used to disconnect the ap‐
pliance from the power
supply during cleaning, re‐
pair and servicing work
and in case of danger
Action:
Trip the disconnection de‐
vice
Check at the -X10 terminal
strip on the appliance that
none of the three phases
carry a live voltage
3 For your safety
Installation manual
39