Rules for safe operation of floor-standing units
To avoid hazards, the following rules must be observed during operation:
The air vent and exhaust outlet on the top of the appliance, and the ventilation holes in the appli‐
ance base must not be covered, obstructed or blocked.
The food containers must be inserted correctly in accordance with the regulations specified in
Plac‐
ing the cooking containers in appliances of size X.10 and X.20' in the user manual.
The suction panel must be locked properly in place.
Live parts
Risk of electric shock from live parts and loose cables
When the safety cover is open, there is a risk of electric shock from touching live parts.
Make sure that any work on the electrical system is performed solely by a qualified electrician from
an authorized service company.
Before removing the safety covers:
Switch off all connections to the power supply.
Take protective measures at every power switch to ensure that the power cannot be switched
on again.
Make sure that the appliance is de-energized.
Make sure that the electrical connections are intact and connected securely before putting the
appliance into use.
Before preparing the appliance for use, make sure that the appliance, including all metallic
accessories, is connected to an equipotential bonding system.
Escaping gas
Risk of explosion from escaping gas
Escaping gas can ignite and cause an explosion.
Never move the appliance during use
For table-top units on a wheeled platform with flexible supply pipe, in order to secure the appliance
in place, make sure that the retaining device which restricts the range of movement of the platform
plus appliance is connected.
Lack of oxygen
Risk of suffocation from lack of air suitable for breathing
Inadequate ventilation at the installation location can lead to suffocation while the appliance is running.
Check the exhaust gas values and if necessary, get an authorized installation company to adjust
the burner.
Ensure that a ventilation system is in place, is working properly and is running, and that the
ventilation requirements stipulated by the installation engineer are met
Do not obstruct lower area of appliance.
Only operate the appliance in a draught-free environment
7 Preparing the appliance for first-time use
Installation manual
102
